Contacta HLD3-LP

HLD3LP with logo.png
DLS-30_Loop pad2 (Small).jpg
Loop Pad chair .png
HLD3 Quick Install Guide.png
HLD3LP with logo.png
DLS-30_Loop pad2 (Small).jpg
Loop Pad chair .png
HLD3 Quick Install Guide.png

Contacta HLD3-LP

289.00

The HLD3 is a domestic driver that is connected to televisions and other audio devices.

Contacta HLD3 Loop Amplifier with built in DAC, 6ft 3.5mm to RCA audio cable, 6ft optical cable, loop pad, power supply, and 5 cable fasteners.

Quantity:
Add To Cart

The HLD3 is a domestic driver that is connected to televisions and other audio devices.

Components

-HLD3 Hearing Loop Driver (HLD)
-Loop Pad
-Power Supply
-Optical Cable
-3.5mm to RCA Cable

Loop Installation Options


-If there is only one hearing aid wearer and they usually sit in the same seat, the loop pad can be used. The loop pad will be most effective when the hearing aid wearer is sitting directly above it and will not be suitable for more than one person to use.
-If there is more than one person who will be using the loop or the loop pad is not suitable then the loop wire will be used to form a loop around the room or furniture.
-There are multiple ways that the loop pad and loop wire can be placed, depending on your room size, furniture and intended use. Below are some illustrations of possible installations.

LED Indications

Power – when the HLD3 has power connected and has been switched on the power LED will show continuous green

Input – when the loop is connected to an audio source the input indicator will flash, it will not always be continuous

Output – when there is audio being driven through the loop the output indicator will show. It will flash continuously when a loop isn’t connected