Contacta Clipboard InfoLoop

Contacta Clipboard loop.png
Contacta Clipboard loop.png

Contacta Clipboard InfoLoop

295.00

Contacta Clipboard InfoLoop Provides induction loop assistance for T-Coil equipped hearing aid users in combination with a clip for paper or pad and a firm, flat surface for ease of writing.

Add To Cart

Setting up: Designed for hand-held use. No set-up required

The battery: When fully charged, the battery will give up to a maximum of 8 hours use depending upon use, however times of 4 to 5 hours are typical. The battery state is monitored at all times and is fuse protected. The unit will beep at approximately 30 second intervals indicating the battery level is low and automatically switch off when the battery is very low.

Preparing to use: (Recommendation) To prevent writing noise being transmitted to the hearing aid user. Place card, or several sheets of paper on the writing surface if not using a pad.

Using the system: During normal operation the power status LED will flash green during conversation.This indicates that the system is working.The loop aerial operates within a 3ft radius of the top off the unit. For best reception, point the unit top towards the hearing aid user.
A beep will be heard when the 60-minute and 40-minute operation time LED‟s (yellow) switch off. The unit remains operational until the final beep shortly before the 20-minute LED and unit power automatically switch off.